Bedankt voor de link.
The "what have you made today" thread
- Thread starter Gadget
- Start date
Bedankt voor de link.
gamemaster84
Ultralighter
Graag gedaan 
Hd8ekownio24ugh5
Thru Hiker
Lots
Last edited:
gamemaster84
Ultralighter
Made a tpu pillow as a test before I start on a sleeping pad. But it leaks a bit grrr. I need to work on my sealing skills
Hd8ekownio24ugh5
Thru Hiker
Looks comfy. 10cms?Made a tpu pillow as a test before I start on a sleeping pad. But it leaks a bit grrr. I need to work on my sealing skills
View attachment 27281
Build-a-Bear
F.K.A Pala2
This might be useful: https://imgur.com/gallery/OB891 (not from me)
gamemaster84
Ultralighter
About 40*20*10cm. I wanted a wider pillow as I always slide off it. But first I need to locate the leak see what I’ve done wrong.
Maybe I’ll make another one to be sure my technique is good enough. then I’m planning a sleeping pad of 200*65*8cm with strips of apex sewn on the baffles and maybe a Mylar strip too to reflect warmth back.
gamemaster84
Ultralighter
Good one thanks!
I have followed some threads on diy packraft too about sealing. Very useful.
Hd8ekownio24ugh5
Thru Hiker
The width was the first thing I noticed. Good move and luck with the mat!
gamemaster84
Ultralighter
Thanks! I'll report back
cathyjc
Thru Hiker
Made a tpu pillow as a test before I start on a sleeping pad. But it leaks a bit grrr. I need to work on my sealing skills
View attachment 27281
What heating widget did you use to do the sealing ?
gamemaster84
Ultralighter
I bought a leather iron form aliexpress
https://m.nl.aliexpress.com/item/4000080944021.html
But the temp is WAY off. The fabric should be used with 210c but when I had it on 200 the fabric melted. By trying and trying I found that 125c was the right setting...
Last edited:
cathyjc
Thru Hiker
Tartanferret
Thru Hiker
Pole sleeve for Scarp1 crossover poles
1.oz DCF and a smidgeon of 1.4oz on the base
8g
1.oz DCF and a smidgeon of 1.4oz on the base
8g
EM-Chiseller
Thru Hiker
@slovhike that looks a nice clean build but for some reason I can't hit the like button....
Something is saying to me.... "I can't see that working! Looks too much depth and width for the support system? & not ideal if it was to be used as a chest pack or a waist pack?
Any pictures or clips of it in use?
Something is saying to me.... "I can't see that working! Looks too much depth and width for the support system? & not ideal if it was to be used as a chest pack or a waist pack?
Any pictures or clips of it in use?
Hd8ekownio24ugh5
Thru Hiker
9
Last edited:
slovhike
Thru Hiker
@slovhike that looks a nice clean build but for some reason I can't hit the like button....
Something is saying to me.... "I can't see that working! Looks too much depth and width for the support system? & not ideal if it was to be used as a chest pack or a waist pack?
Any pictures or clips of it in use?
Odd Man
Thru Hiker
Now do the same for a seat pad.
Tartanferret
Thru Hiker
Stuff sack for MSR Blizzard stakes.Same spec as the MLD One I pinched for my pointy pole jack, just black rather than green.
1.43oz Cuben, double thickness on the base.
very crisp, very Sci-fi, a joy to work with.
Frankie’s only peed off because that’s where she likes her siesta
Last edited:
Whiteburn
Thru Hiker
Top Box for the Arc Haul, 28cm * 20cm * 8cm deep, 88g. Two compartments, one for the crampons the other for ski googles, face mask, spare gloves, etc. Makes for easy access & its just secured to the existing 'Y' strap fittings so easily fitted & removed.
It was intended as a prototype so I used some 225 g/ m2 cordura type fabric that I had but after completion may just live with it as replicating from X-grid would probably only save 20g.
It was intended as a prototype so I used some 225 g/ m2 cordura type fabric that I had but after completion may just live with it as replicating from X-grid would probably only save 20g.
Hd8ekownio24ugh5
Thru Hiker
M
Last edited: